high temperature resistant adh > high temperature anti wear abrasion ceramic epoxy adhesive

high temperature anti wear abrasion ceramic epoxy adhesive

BD240 high temperature anti wear abrasion resistant bonding ceramic epoxy adhesives

performance features of our BD240 abrasion wear high temperature resistant epoxy bonding ceramic adhesive:
1.It’s consist of modified toughening heat resistant resin and special curing agent
2.Aging resistant,high temperature resistant,medium resistant,good toughness
3.Can cure at the normal temperature,can also heat up for curing
4.The highest working temperature is 240 degree,when it’s used as repairing agent.The highest working temperature is 220
degree,when it’s used as structure adhesive.

product usage:
With the high bonding strength,good toughness, suitable for the adhesive of metal,ceramic,cement and glass.
Used in the paste of wear resistant ceramic chip under the temperature of 220 degree working condition,
also used in the bonding and repairing of machine parts of high temperature,high strength working condition.

performance index:

product name	physical state	standard packaging	operation time limit (25℃)	usable time (25℃)	range of application
BD240 high temperature wear resistant ceramic adhesive	paste	12kg	1h	12 hours	With the high adhesive strength to steel, cement,ceramic,aluminum alloy, stainless steel and various other material,especially suitable for the paste of wear resistant ceramic chip on the surface of the equipment which suffering from larger impact under the temperature of 240 degree

item	color	density (g/cm3)	shear strength (Mpa) GB7124-2008	impact strength (J/cm2) GB6328-1999	tensile strength (Mpa) GB6329-2008	compressive strength (Mpa) GB1041-2008	working temperature （℃）
BD240	white	1.27	20	120	91	96	-60-240

How to use:
1.Surface treatment: Grinding or sand blasting to clean up the dust,greasy dirt and rust on the surface of adherend.
Clean it by cleaning agent and dry it by airing in the end.

2.Configure adhesive: Make A and B two components mix uniformly according to mass ratio A:B=2:1,
When the temperature is low in winter,can preheat A component first.

3.Using adhesive: Make configured adhesive spread coating on the surface of adherend uniformly.
Double spread,the bonding effect will be better.

4.Curing: Initial curing at the room temperature for 2 hours,fully curing for 24 hours,heat it up to the temperature of 80 degree and keep this temperature for 2 hours,then do the last curing,in this way,it can get the higher strength(≥23MPa).
When the temperature is below 15 degree,the curing speed of adhesive layers is slow,curing is incomplete,need heating it up to the temperature of 60~80 degree and keeping this temperature for 2 hours after the adhesive layers initial curing.(Bake it with the iodine tungsten lamp or heat it with hair dryer or use other methods)

Packaging specification:
Packed in a plastic drum,12Kg/group: A component: 8Kg/drum; B component: 4Kg/drum

Transportation storage:
Sealed storage in the cool and dry place. The warranty period is 1 year. Avoid placing it upside down,
knocking against and transporting it as a non-dangerous product during transportation.

Product packaging photo of BD240 high temperature anti wearing abrasion resistant ceramic adhesives:

------分隔线----------------------------